AMAR MAKE HORIZONTAL FILTER PRESS

It consists of SS Shell & top cover with swing bolts to give pressure tight enclosure. The filter cartridge assembly inside the shell consists of several horizontally arranged disc type filter plates with perforated supporting screens, filter media & interlocking cups. The entire assembly complete with pump & piping connection is mounted on a suitable SS Trolley.

STANDARD FLOW TYPE

The impure liquid to be filtered is fed to the filter shell by pump. It arrives on top of each plate through openings on the sides of the plate. As liquid pressure increases, the filter media (paper / fabric) holds back the impurities & allows the crystal clear filtrate to pass through the central channel (formed by interlocking cups) which takes the filtrate to the outlet of filter. This filter is most commonly used to obtain clear liquid. However if required, the cake formed between the plates can be obtained. Filtration is continued until its rates becomes very slow due to increased cake resistance.

REVERSE FLOW ZERO HOLDUP TYPE
Here the direction of flow of liquid is exactly opposite to the flow in standard filter i.e. the impure liquid to be filtered enters the filter from the bottom into the centre channel & goes to the top of each plate. The clear filtrate flows out from openings on side of plates to the shell & then to the outlet. This flow ensure almost 100% filtration of the liquid which is not so with the standard flow type.