Sparkler Filters
 
 
Salient Features :

» Zero Hold up types Models in M.O.C. SS-304, 316, 316L.
» 8", 14", 18" ,24" & 33" sizes with 'n' no. of plates.
» Complete filtrations of batch without any holdup of unfiltered liquid.
» GMP model with complete unit mounted on SS trolly.
» Back wash facility for cleaning the filter without opening the assembly.
» SS 304 Jacket for hot filtration, Flameproof Motor, Sight Glass on outlet offered on request.
» Ideal for filtration in sugar, beverage, pharmaceuticals, chemicals, dyes, edible & non-edible, resins, paints, perfumes, activated carbon etc.
» The cake, filteraid &solids remain totally enclosed allowing filtration of toxic, hazardous &explosive liquids.
» No contamination of internal surface of shell.
» The top dome structure ensures fast & easy removal of cartridge assembly & cleaning of cake.
 
Construction & Working
It consists of SS Shell & top cover with swing bolts to give pressure tight enclosure. The filter cartridge assembly inside the shell consists of several horizontally arranged disc type filter plates with perforated supporting screens, filter media & interlocking cups. The entire assembly complete with pump & piping connection is mounted on a suitable SS Trolley.

The direction of flow of liquid is exactly opposite to the flow in standard filter i.e. the impure liquid to be filtered enters the filter from the bottom into the centre channel & goes to the top of each plate. The clear filtrate flows out from openings on side of plates to the shell & then to the outlet. This flow ensure almost 100% filtration of the liquid which is not so with the standard flow type.


Technical Specification
The filter comes with inlet, outlet, pressure guage, bypass, safety valve, sampler, centrifugal pump (with mechanical seal) & SS - Trolley Max. working pressure : 5kg/cm²

Max. working temp.: 100 - 200 °C (depending on filter & sealing media)
Model Plateb Dia inches No. of Plates Filter Area m2 Cake holding cap.ltrs. Output ltrs./hr. Size of Pump Pump hp
AS 806 8 6 0.217 4.9 600 0.5" 1.0
AS 808 8 8 0.279 6.3 800 0.5" 1.0
AS 1408 14 8 0.819 24.75 1500 1" 2.0
AS 1410 14 10 1.001 30.25 1700 1" 2.0
AS 1412 14 12 1.183 37.75 1900 1" 2.0
AS 1808 18 8 1.28 45 2800 1.5" 3.0
AS 1810 18 10 1.65 55 4000 1.5" 3.0
AS 1812 18 12 1.95 65 4600 1.5" 3.0
AS 1815 18 15 2.40 80 5500 1.5" 3.0
AS 1824 18 24 3.75 125 8200 1.5" 3.0
AS 2412 24 12 3.43 117 7000 2" 5.0
AS 2415 24 15 4.192 144 8000 2" 5.0
AS 2418 24 18 5.035 171 8500 2" 5.0
AS 2424 24 24 6.625 225 12500 2" 5.0
AS 3307 33 7 4.176 118 7000 2.5" 5.0
AS 3310 33 10 5.163 163 10000 2.5" 5.0
AS 3314 33 14 7.821 222 13500 2.5" 5.0

Note : The flow rate mentioned is in terms of water with 5% carbon, filter media of poly propylene cloth & Centrifugal Filteration rate may change depending on viscosity of liquids, quality of filter media, nature of solids in liquid to be filtered and pump type.
Since development is a continuous process the above specification are subject to change without prior notice
Optional

» FLP Motors.
» MS / SS-304 jacket for hot filtration.
» Backwash facility for Zero hold up filters to take number of batches without opening the filter.
» Gear, lobe or roto pumps for different liquids.
» Filter models with higher no of Filter plates and deeper plates (only in 18" model) for higher cake capacity can be offered.
 
Application
Most useful for clear filtrations of syrups, liquids, beverages, chemicals, pharmaceuticals, Perfumes, Dyes & Intermediates, Activated Carbon, Cosmetics, Varnishes, Polymers, Resins & Paints, Plant water Polishing, Fruit Juice, Soft drink, Edible & Non-Edible etc.
 
Top