Closed Loop Heating Cooling System

Salient Features

  • Temperature range: -90°C to +250°C
  • Temperature controller type: PID cascade control
  • Temperature Display: Touch screen TFT display (7")
  • Temperature control Type: Jacket & / or process temperature control selectable
  • Display resolution: 0.01°C
  • Temperature sensors: RTD PT 100
  • Temperature control accuracy: ±0.5°C
  • Heating: Electrical heating
  • Cooling: Refrigeration System (CFC free refrigerants)
  • Complete SS-304 Construction
  • RS 485 communication port with SCADA software
  • Multistep ramp soak programmable controller
  • Data logging/recording optional
  • Mounting on suitable caster wheels
  • Suitable chillers for water cooled machines

Standard Safety Features

  • System over temperature cut-off: Independent
  • Compressor over pressure cut-off
  • Heater, pump & compressor overload cut-off
  • Compressor over temperature cut-off
  • Safety interlock pump no flow
  • Compressor oil pressure difference cut-off

CLM Series (-90°C to +200°C) - for Lab Applications

Model Temperature Range in °C Heating kW Cooling power kW Pump Flow Max Pump Pressure Max Dimensions (W X D X H)mm End Connection
0°C -20°C -30°C
-35 to +200 1.25 0.6 0.3 0.1 18-20 LPM 0.4 bar 400 X 450 X 800 M.24 Male
-35 to +200 1.5 0.8 0.5 0.25 30-35 LPM 0.4 bar 420 X 520 X 875 M.24 Male
-35 to +200 3 1.2 0.7 0.3 30-35 LPM 0.4 bar 450 X 600 X 900 M.24 Male
-35 to +200 4.5 2.5 1.3 0.6 40-45 LPM 0.7 bar 540 X 650 X 1250 M.42 Male
Model Temperature Range in °C Heating kW Cooling power kW Pump Flow Max Pump Pressure Max Dimensions (W X D X H)mm End Connection
0°C -40°C -60°C
-75 to +180 1.5 0.6 0.6 0.3 30-35 LPM 0.4 bar 600 X 650 X 1400 M.24 Male
-75 to +180 3 1.5 1.4 1.2 30-35 LPM 0.4 bar 600 X 650 X 1400 M.24 Male
-75 to +180 4.5 2.2 2.0 1.4 40-45 LPM 0.7 bar 700 X 750 X 1500 M.42 Male
-90 to +180 4.5 2.2 2.0 1.4 40-45 LPM 0.7 bar 700 X 750 X 1500 M.42 Male
Note:
  • The given cooling power is at 30°C ambient temperature. Increase in ambient temperature will affect performance of machine
  • Suffix "W" in model is for water cooled machines

CPM Series (-60°C to +200°C) - for Pilot Applications

Model Temperature Range in °C Heating kW Cooling power kW Pump Flow Max Pump Pressure Max Dimensions (W X D X H)mm End Connection
0°C -20°C -30°C
-35 to +200 6 4 2.2 1.3 50-55 LPM 1.0 bar 560 X 650 X 1300 M.42 Male
-35 to +200 9 7 3.5 1.8 50-55 LPM 1.0 bar 600 X 690 X 1300 M.42 Male
-30 to +200 12 12 6 3 80-90 LPM 1.5 bar 700 X 750 X 1500 M.42 Male
-30 to +200 18 15 7 3.5 80-90 LPM 1.5 bar 750 X 790 X 1500 M.42 Male
Model Temperature Range in °C Heating kW Cooling power kW Pump Flow Max Pump Pressure Max Dimensions (W X D X H)mm End Connection
0°C -40°C -60°C
-60 to +200 6 6.5 3.2 1 50-55 LPM 1.0 bar 750 X 790 X 1500 M.42 Male
-60 to +200 9 12 6 1.5 80-90 LPM 1.5 bar 750 X 790 X 1500 M.42 Male

CIM Series (-30°C to +170°C) - for Industrial Applications

Model Temperature Range in °C Heating kW Cooling power kW Pump Flow Max Pump Pressure Max Dimensions (W X D X H)mm End Connection
0°C -20°C -30°C
-30 to +170 21 25 11 8 100 LPM 1.5 bar 1200 X 950 X 1600 M.42 Male
-30 to +170 33 45 21 12 120 LPM 2 bar 1400 X 950 X 1800 M.42 Male
-30 to +170 45 70 30 17 120 LPM 2 bar 1800 X 1000 X 1600 M.42 Male
-30 to +170 66 90 45 24 120 LPM 2 bar 2000 X 1200 X 2000 M.42 Male
Note:
  • Suffix "W" in model is for water cooled machine
  • The given cooling power is at 35°C ambient temperature. Increase in ambient temperature will affect performance of machine
  • The temperature range mentioned above is at outlet of the machine hence temperature inside the process / load may vary due to various factors like process design, distance, head, insulation etc.
  • Custom built models on request for larger capacity

Optional Accessories

GA

Please fill the details below (Refer image above for parameters):

Maximum Process Temperature in °C
Minimum Process Temperature in °C
Reactor/Process Volume in Liters
Jacket/Limpet Volume in Liters
Head in Meters
Distance in Meters
Required time from Ambient to max. temp.
Required time from Ambient to min. temp.
Name
Company Name
Contact Number
Email ID

Address

6, Parmar Industrial Estate,Kale Marg,
Bail Bazaar, Kurla (West)
Mumbai – 400 070. India.

Landmark: Opposite Bail Bazaar Police Station
Google map

Tel: +91-22-6225 5000
(Office is open now)

Email:
sales@amarequip.com
export@amarequip.com

LinkedIn Page

Get in touch

Amar Equipments © 2019 All Rights Reserved